应用搜索
罗德与施瓦茨已制定一系列的应用指南、应用说明以及应用视频,旨在分享我们在测试与测量仪器方面的知识、原理及方法,并帮助您充分发挥罗德与施瓦茨公司测试与测量仪器的效能。
应用搜索
罗德与施瓦茨已制定一系列的应用指南、应用说明以及应用视频,旨在分享我们在测试与测量仪器方面的知识、原理及方法,并帮助您充分发挥罗德与施瓦茨公司测试与测量仪器的效能。
1039 结果
This application note provides software and instructions for a simple check of the acoustic performance of mobile phones. It targets mainly service centers and repair workshops which have to perform incoming tests of defective mobile phones and final tests of repaired mobiles. A focus is set on short test times and ease of use, without compromising accuracy and repeatability of results.
Dec 14, 2017 | AN-No. 1GA69
源测量单元 R&S®NGU401 和 R&S®NGU201 能够精确测量亚微安到安培范围内的电流。本应用指南介绍了一种工具,可利用仪器的任意功能生成电压或电流扫描。快速日志能够在扫描期间捕获电压和电流值。然后,应用程序会测定每个扫描步骤的电压和电流值,并将结果绘制成伏安曲线。此工具可用于测量二极管、LED 和太阳能板等所有双极设备的特性。本应用指南还可与直流电源 R&S®NGM201 和 R&S®NGM202 结合使用。
2月 15, 2021 | AN-No. 1GP129
5G is the fifth generation of wireless communication technology supporting cellular networks. From GSM (2G) through to LTE (4G), each generation addresses technical challenges not overcome by its predecessor. As with previous generations, 5G requires new mobile devices and new base stations (BTS).Unlike previous generations, the use of radio beams in 5G requires completely new approaches with regard to the compliance, coverage, and quality of service testing.The new air interface is called 5G NR ("new radio"). This application note describes the measurement challenges of 5G NR and makes clear the benefits of using a monitoring receiver for measuring 5G signals.Real-world examples explain how to perform various key 5G measurements. The final section covers further 5G measurement possibilities using R&S products. "Over-the-air" (OTA) measurements are essential in 5G. This means staff from regulators and operators must work in unknown radio environments that vary according to location (e.g. urban or suburban) and mission (e.g. 5G BTS compliance testing or interference hunting). Measurement equipment must operate in a wide range of scenarios (close to the mast and far from the mast) and offer user-friendly functionality that enables the required measurements.Considering current global deployment trends, this paper focuses on the FR1 frequency band (sub 6 GHz).
Jun 07, 2021 | AN-No. 1SL366
R&S®VISA 是一个标准化软件库,支持从 PC 应用通过多种接口与在网络中检测到的各类测试与测量仪器进行快速通信。 R&S®VISA 还包括一个跟踪工具,可同步监控多个应用和测试与测量仪器之间的通信,并支持借助高效筛选器进行针对性分析。
5月 26, 2020 | AN-No. 1DC02
该应用指南介绍了一种通过发生器单次扫描记录总谐波失真、单谐波失真度及电平的程序。 可以安装使用可执行文件,无需编程。 该应用指南提供了源代码,作为自定义修改的依据。
7月 16, 2011 | AN-No. 1GA56
该应用指南提供了一种用于打印音频分析仪 R&S® UPV 上相关测量结果报告的工具。 用户可自由配置可执行文件,以便将任何结果图形和图标加入报告中。 此外,用户可以将类库应用示例加入自定义应用程序,以便增加打印功能。
7月 18, 2011 | AN-No. 1GA57
此应用指南中提供的仪器设置有助于分析存入波形文件中的退化的语音信号,并且显示 FFT 频谱及波形。
9月 05, 2014 | AN-No. 1GA66
本应用指南介绍一种数字电平移位器,以将 R&S®UPP-B2 和 R&S®UPV-B41 I²S 接口连接至逻辑电压非 3.3 V 的被测设备。
3月 27, 2020 | AN-No. 1GA71
All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies. In the case of parallel and serial connections it is usually desired to switch all channels simultaneously on and off for protecting the supplied circuitry and for avoiding overcurrent on other power supply channels.This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.
Jun 15, 2020 | AN-No. 1GP126
ARB Toolbox 是一款易于使用、功能齐全的软件包,可用于多种任意波形相关任务。此软件可用于根据自定义 IQ 数据创建任意波形文件、导入 MATLAB .mat 文件的数据、以图形方式评估波形内容、对波形进行重新采样或滤波、创建模拟调制信号并用作任意波形文件、编辑波形文件中的标记数据,以及使用组合器创建复杂的多载波场景。
12月 13, 2018 | AN-No. 1GP88
该应用指南提供了一种通过在音频分析仪 R&S®UPV 或 R&S®UPV66 上进行 PESQ、POLQA 以及延时测量实现电平调整、测试自动化以及报告的应用程序。
5月 08, 2013 | AN-No. 1GA62
This application note provides an application program for the audio analyzer R&S®UPV which calculates and displays the loudness of non-stationary sounds according to ISO 532-1 (Zwicker method). The theoretic background of the evaluation method is briefly explained.
Dec 14, 2017 | AN-No. 1GA67
This application note provides an application program and instructions for performing speech quality tests and delay measurements in a live network, using the R&S®UPV audio analyzer.
Dec 14, 2017 | AN-No. 1GA68
适用于罗德与施瓦茨仪器的多功能软件工具 RSCommander 是一款多功能软件工具,适用于各式各样的罗德与施瓦茨频谱分析仪、网络分析仪、信号发生器以及示波器。它能够自动发现仪器、创建屏幕截图、读取迹线、传输文件以及创建简单脚本。
12月 24, 2017 | AN-No. 1MA074
很多测量都在音频工程环节完成,目的是确保模拟以及数字设备的传输质量。 因此,适合执行所有这些任务的音频分析仪必须整合多重功能,由此产生大量设置。此应用指南面向使用 R&S®UPP 以及 R&S®UPV 音频分析仪的测试工程师。 此应用指南描述了设置示例,便于随时着手各种基本的音频测量。 每项设置的信息是基于测量类型、基本标准以及修改图形显示结果的方式而提供的。
7月 07, 2014 | AN-No. 1GA64
R&S® CMU200 与 R&S® UPV 结合,适用于各项移动电话语音功能测试,比如根据 3GPP 26.132 的声学测试或根据 ITU-T P.862 (PESQ®) 或 ITU-T P.863 (POLQA®) 的语音质量测试。 此应用指南解释了在这些任务中如何使用 R&S® CMW500 代替 R&S® CMU200。
7月 25, 2014 | AN-No. 1GA65
This paper reviews the classical spectrum analyzer measurement of L(f) and its shortcomings and discusses how modern phase noise test sets measure phase noise and avoid the limitations imposed by direct spectrum measurements.
Mar 31, 2020
本应用指南介绍为 R&S®NGM200 电源创建除 NGM-K106 电池模拟选件提供的标准模型之外的其他电池模型。这主要是为了使用内部 QuickArb 功能逐步使电池或可充电电池放电。然后可以使用快速数据记录功能 FastLog 记录电池的放电情况。记录的数据存储在 .CSV 文件中。此文件调整后可作为电池模型用于 R&S®NGM200 的电池模拟模式。为此,罗德与施瓦茨为开发人员提供工具,让他们的工作更加简单轻松。此工具可以计算电池模型需要的所有数据。
2月 15, 2021 | AN-No. 1GP128
该应用指南解释了如何使用声学校准以便直接在 R&S® UPV 中输入或读取声压电平。 该应用指南中描述了一种应用程序,该程序可以针对麦克风及扬声器的校准执行必要的测量、管理校准值并将其输入任何适当的用户自定义设置。
10月 11, 2012 | AN-No. 1GA47
Miloslav Macko 1MA196 1MA196, Forum, 应用程序, 仪器, 远程, 控制, Python, 脚本, R&S Forum, RS Forum, R&SForum, RSForum 使用 R&S®Forum 应用程序实现仪器远程控制 使用 R&S®Forum 应用程序实现仪器远程控制 Miloslav Macko 1MA196 1MA196, Forum, 应用程序, 仪器, 远程, 控制, Python, 脚本, R&S Forum, RS Forum, R&SForum, RSForum 使用 R&S®Forum 应用程序实现仪器远程控制 相关产品
6月 28, 2018 | AN-No. 1MA196