TDOA and AOA hybrid geolocation system

TDOA and AOA hybrid geolocation systems

The best of both worlds

Locating transmitters is an essential mission for all regulators and organizations that are assigned radio monitoring tasks. This pertains especially to unlicensed and illegal transmitters as well as stations interfering with other radio services. Traditionally, direction finders have been used for location tasks. New solutions, based on the time difference of arrival (TDOA) principle are an excellent complement to classical DF systems.

TDOA - the concept

Prerequisite for a TDOA-based location is a sufficient number of receivers in the vicinity of the transmitter. Since these receivers are at slightly different distances from the transmitter, the same signal reaches them at slightly different times. Based on these time differences, the location of the transmitter is calculated. Given that electromagnetic waves propagate at approx. 300 000 km/s, the time accuracy of the system has to be in the nanosecond range.

The different geolocation methods

Congested signal environment
Congested signal environment
Geolocation using AOA method
Geolocation using AOA method
Geolocation using TDOA method
Geolocation using TDOA method
The best of both worlds - hybrid geolocation
The best of both worlds - hybrid geolocation

TDOA – the Rohde & Schwarz way

  • The excellent sensitivity of the system provides a high signal-to-noise ratio (SNR). This leads automatically to higher location accuracy. Furthermore, higher SNR compensates inaccuracies due to smaller signal bandwidths. Thus, narrowband signals are located much more precisely or even found at all. Thanks to the superior overall performance of the equipment, it is extremely well suited for operation in dense urban environments. There, TDOA is very advantageous but the signal scenario is very challenging for the devices.
  • TDOA, angle of arrival (AOA) and even a hybrid solution are possible, offering always the best option for each task.In the case of direction finders, the same device can even serve as a TDOA receiver or classical DF.
  • The equipment is available for sophisticated, ITU-compliant monitoring tasks when no location mission is running. While locating transmitters is an important task, experience shows that only a minor fraction of time is spent for it. The system is used to the greatest possible extent.
  • The time a signal takes to travel within the device from the antenna input to the signal processing stage is taken into account when issuing the timestamp. This unique Rohde & Schwarz development provides higher location accuracy. In addition, it makes it possible to freely combine all TDOA-capable equipment.

Hybrid: TDOA and AOA – the best of both worlds

Both principles, TDOA and AOA have their respective advantages. TDOA works well with broadband emissions, typical for modern communications signals like DVB-T, DAB, LTE, or WiMAX™. The concept of TDOA even allows compensating effects of reflection and multipath propagation, making it especially powerful in dense urban environments. AOA has its strengths when it comes to narrowband, unmodulated or continuous-wave (CW) signals.

Consequently, the perfect system would integrate TDOA and AOA, where the operator decides case by case which one is better suited or even selects a combination of both. That is exactly what the new hybrid TDOA-AOA solutions from Rohde & Schwarz provide: the best of both worlds.

Further information






我同意,在网站Imprint中提到的Rohde & Schwarz GmbH & Co. KG和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和解决方案相关信息


您可以随时发送电子邮件至 撤销此同意声明,邮件主题注明“Unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

An error is occurred, please try it again later.